Polyolefin Heat Shrink Tubing
Polyolefin heat shrink tubing is composed of radiating crosslinked polyolefin materials, widely used in electronics, automobiles, communications, ships, aircraft and other manufacturing industries.
Polyolefin heat shrink have properties of excellent insulating, environmental sealing, and resistant to impact and abrasion, 2:1 shrink ration allows it easily fit over irregular shape and large connectors.
Polyolefin Heat Shrink Tubing
High flexibility and insulation
Flame retardant
low shrinkable temperature
- Polyolefin Heat Shrink Display
- Where and How to Use Polyolefin Heat shrink
- Polyolefin Heat Shrink Advantage
Item: Polyolefin heat shrink
Shrink Ratio: 2:1
Minimum Shrinkage Temp: 70℃
Operating Temp: -55℃ to 125℃
Tensile Strength:10.4MP
Flammability: Flame
Supplied format: Round anf flat
Cutting method: Scissors or sharp knife
Size | Size as supplied(mm) | Size after heating(mm) | Package | ||
Inside diameter | Wall thickness | Inside diameter | Wall thickness | m/roll | |
φ0.8 | 1.1±0.2 | 0.18±0.08 | 0.50 | 0.22 | 200 |
φ1.0 | 1.5±0.2 | 0.18±0.08 | 0.65 | 0.28 | 200 |
φ1.5 | 2.0±0.2 | 0.20±0.08 | 0.85 | 0.32 | 200 |
φ2.0 | 2.5±0.2 | 0.20±0.08 | 1.00 | 0.35 | 200 |
φ2.5 | 3.0±0.2 | 0.22±0.08 | 1.30 | 0.38 | 200 |
φ3.0 | 3.5±0.2 | 0.25±0.10 | 1.50 | 0.40 | 200 |
φ3.5 | 4.0±0.2 | 0.25±0.10 | 1.80 | 0.42 | 200 |
φ4.0 | 4.5±0.2 | 0.25±0.10 | 2.00 | 0.45 | 200 |
φ4.5 | 5.5±0.2 | 0.25±0.10 | 2.30 | 0.50 | 200 |
φ5.0 | 5.5±0.2 | 0.28±0.10 | 2.50 | 0.55 | 100 |
φ6.0 | 6.5±0.2 | 0.28±0.12 | 3.00 | 0.55 | 100 |
φ7.0 | 7.5±0.3 | 0.30±0.12 | 3.50 | 0.55 | 100 |
φ8.0 | 8.5±0.3 | 0.30±0.12 | 4.00 | 0.60 | 100 |
φ9.0 | 8.5±0.3 | 0.30±0.12 | 4.50 | 0.60 | 100 |
φ10 | 10.5±0.3 | 0.30±0.12 | 5.00 | 0.60 | 100 |
φ11 | 11.5±0.3 | 0.30±0.12 | 5.50 | 0.60 | 100 |
φ12 | 12.5±0.3 | 0.30±0.12 | 6.00 | 0.60 | 100 |
φ13 | 13.5±0.3 | 0.30±0.12 | 6.50 | 0.65 | 100 |
φ14 | 14.5±0.3 | 0.30±0.12 | 7.00 | 0.65 | 100 |
φ15 | 15.5±0.4 | 0.30±0.12 | 7.50 | 0.70 | 100 |
φ16 | 16.5±0.4 | 0.40±0.10 | 8.00 | 0.70 | 100 |
φ17 | 17.5±0.4 | 0.40±0.10 | 8.50 | 0.70 | 100 |
φ18 | 19.0±0.5 | 0.35±0.10 | 9.00 | 0.80 | 100 |
φ20 | 21.0±0.5 | 0.40±0.15 | 10.00 | 0.80 | 100 |
φ22 | 23.0±0.5 | 0.40±0.15 | 11.00 | 0.80 | 100 |
φ25 | 26.0±0.5 | 0.50±0.15 | 12.50 | 0.90 | 50 |
φ28 | 29.0±0.5 | 0.50±0.15 | 14.00 | 0.90 | 50 |
φ30 | 31.5±1.0 | 0.50±0.15 | 15.00 | 0.95 | 50 |
φ35 | 36.5±1.0 | 0.50±0.15 | 17.50 | 1.00 | 50 |
φ40 | 41.5±1.0 | 0.55±0.15 | 20.00 | 1.00 | 50 |
φ45 | 46.5±1.0 | 0.55±0.15 | 22.50 | 1.00 | 25 |
φ50 | ≥50 | 0.55±0.15 | 25.00 | 1.00 | 25 |
φ60 | ≥60 | 0.60±0.15 | 30.00 | 1.30 | 25 |
φ70 | ≥70 | 0.65±0.15 | 35.00 | 1.30 | 25 |
φ80 | ≥80 | 0.65±0.15 | 40.00 | 1.46 | 25 |
φ90 | ≥90 | 0.56±0.15 | 45.00 | 1.46 | 25 |
φ100 | ≥100 | 0.65±0.20 | ≤50.00 | 1.46 | 25 |
φ120 | ≥120 | 0.65±0.20 | ≤60.00 | 1.56 | 25 |
φ150 | ≥150 | 0.65±0.20 | ≤70.00 | 1.56 | 25 |
φ180 | ≥180 | 0.65±0.20 | ≤70.00 | 1.56 | 25 |
Polyole heat shrink widly used in electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to- cable transitions.
How to use polyolefin heat shrink?
1, Cut off suitable length of tubes for you need.
2, Slide thbing onto cables.
3, Apply heat until tubing is competely shrunk.
1. Polyloefin heat shrink can rapid heat shrink, fully fitted wire.
2. Polyloefin heat shrink can safe to use and insulation protection.
3. Polyloefin heat shrink has high toughness, wear-resistant, anti-aging.
DIFVAN also offer other types heat shrink tubing is polyolefin heat shrink tubing.
Polyolefin tubing is a highly flexible heat shrink tubing with a low shrink temperature and excellent abrasion resistance.
Polyolefin heat shrink is developed environment-friendly flame retardant heat shrinkable tube, using specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
Polyolefin heat shrink tubing performs environment-friendly, flexible flame retardant, quick shrink and stable characteristics. Polyolefin heat shrink tubing has passed 600V/300Vcertificate.
Polyolefin heat shrink is made from high quality polyethylene materials. It has excellent flame retardant property and insulation.
Adhesive-Lined Polyolefin Heat Shrink Tubing, features an inner wall that melts creating an environmental seal against moisture penetration.
Polyolefin tubing is Halogen free, non-smoke, non-toxic, flame-retardant
Shrink ratio: 2:1 polyolefin shrink tubing working temperature is -45-125℃.
Polyolefin heat shrink tubing have 5 standard color red, blue, yellow, white, black, other color as your request.
Dual Wall Adhesive-lined polyolefin shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to- cable transitions.