Marine terminal block

When it comes to wiring an electrical connection, electrical terminal blocks help to simplify a electrical connection.

Marine terminal block can prevent short circuit, so it is widely used extensively through out the marine industry.

  • marine electrical terminal block
  • marine terminal block
  • marine terminalblock wiring

marine fuse terminal block

Marine terminal block

Good conductivity

High toughness and unbreakable shell

boat terminal block

Item No.Wire rangedimension(mm)Rated current/Voltage
LL1ABDEφ1φ2
TB-15030.5-1.5mm²46347.5922174815A/600V
TB-150454447.59221748
TB-150563527.59221748
TB-150672627.59221748
TB-1510108977.59221748
TB-15121251137.59221748
TB-25030.5-2.5mm²554410.51230204825A/600V
TB-2504675610.512302048
TB-2505796810.512302048
TB-2506907910.512302048
TB-251013912910.512302048
TB-251216315310.512302048
TB-45030.5-4mm²69581516.537.523.55845A/600V
TB-45048675.51516.537.523.558
TB-4505113921516.537.523.558
TB-4506120109.51516.537.523.558
TB-4510186.51761516.537.523.558
TB-60030.5-15mm²7563151737.5305860A/600V
TB-600482.581151737.53058
TB-6006128116151737.53058
TB-6012235223151737.53058

Marine terminal block display

1, Thickened guides, high-quality screws, nickel-plated surface anti-corrosion.

marine junction block

2, The shell is made of PC engineering plastic, which is resistant to high temperature, high toughness and not easy to break。

blue sea system terminal block

3,PC protective cover, dustproof and durable.

wire terminal block

Marine terminal block are used in following equipment:

1, Distribution box

2, Electrical cabinet

3, Meter stand

marine terminal block with cover

when setting up a wiring or electrical system, electrical terminal block is essential. One type of marine terminal block.
Marine electrical terminal block are wiring blocks used to organize wires with ring, fork or spade terminals.
Marine fuse terminal block selection is manufactured with a nickel-plated brass and special feature brass studs.

Marine terminal block offer different amperage sizes and are great for organizing wiring installations or can be used with terminal jumpers to combine wires on a common block.
Marine terminal block wiring provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.

Each position block offers a screw pitch of 10mm with a max current of 15A and a max voltage tolerance of 600V before risking meltdown or implosion.
Boat terminal block are easy to install and held in place by two screw holes at either end of the terminal.
Closed back design completely insulates power from the mounting surface.
Each screw pair is one isolated circuit.
The brass studs on each terminal block feature a “dog point” to help guide a terminal and nut onto the stud. Each of the terminal blocks also has barriers between the connection points for additional protection.

Scroll to Top