Green Yellow Heat Shrink
Green yellow heat shrink is made through co-extrusion of two different colored specially formulated masterbatches of polyolefin and irradiation cross-linking process with electronic accelerators.
Green yellow heat shrink tubing used to identify electrical grounding as well as protecting and insulating wires harnesses of light cabling. Easy to mark for additional identification.
- Green Yellow Heat Shrink Specification
- Green Yellow Heat Shrink Display
Cable marking yellow/green heat shrink Tube 2:1
Working temperature: -55°C ~ 125°C
Shrink Temperature: Start at 70°C, and shrunk completely at 120°C .
Shrinking ratio: 2:1
Vertical shrinkage ratio: ≤8%
| Item NO. | Before shrink/mm | After shrink/mm | Packing M/ROLL | ||
| Inner Diametre | Wall thickness | Inner Diametre | Wall thickness | ||
| φ1 | ≥1.0 | 0.18 | 0.5-0.1 | 0.37±0.05 | 200 |
| φ1.5 | ≥1.5 | 0.19 | 0.75-0.1 | 0.38±0.05 | 200 |
| φ2.0 | ≥2.0 | 0.19 | 1.00-0.1 | 0.38±0.10 | 200 |
| φ2.5 | ≥2.5 | 0.2 | 1.25-0.1 | 0.40±0.10 | 200 |
| φ3.0 | ≥3.0 | 0.2 | 1.5-0.5 | 0.40±0.10 | 200 |
| φ3.5 | ≥3.5 | 0.2 | 1.5-0.1 | 0.40±0.10 | 200 |
| φ4.0 | ≥4.0 | 0.21 | 2.0-0.1 | 0.42±0.10 | 200 |
| φ5.0 | ≥5.0 | 0.21 | 2.5-0.1 | 0.42±0.10 | 100 |
| φ6.0 | ≥6.0 | 0.21 | 3.0-0.1 | 0.42±0.10 | 100 |
| φ7.0 | ≥7.0 | 0.21 | 3.5-0.1 | 0.42±0.10 | 100 |
| φ8.0 | ≥8.0 | 0.21 | 4.0-0.1 | 0.42±0.10 | 100 |
| φ10.0 | ≥10.0 | 0.24 | 5.0-0.1 | 0.48±0.10 | 100 |
| φ12.0 | ≥12.0 | 0.25 | 6.0-0.1 | 0.50±0.10 | 100 |
| φ14.0 | ≥14.0 | 0.26 | 7.0-0.1 | 0.52±0.10 | 100 |
| φ16.0 | ≥16.0 | 0.29 | 8.0-0.1 | 0.58±0.10 | 100 |
| φ18.0 | ≥18.0 | 0.30 | 9.0-0.1 | 0.60±0.10 | 50 |
| φ20.0 | ≥20.0 | 0.31 | 10.-0.1 | 0.62±0.10 | 50 |
| φ25.0 | ≥25.0 | 0.35 | 12.5-0.1 | 0.70±0.10 | 25 |
| φ28.0 | ≥28.0 | 0.37 | 14.0-0.1 | 0.75±0.10 | 25 |
| φ30.0 | ≥30.0 | 0.39 | 15.0-0.1 | 0.78±0.20 | 25 |
| φ35.0 | ≥35.0 | 0.39 | 17.5-0.1 | 0.78±0.20 | 25 |
| φ40.0 | ≥40.0 | 0.39 | 20.1-0.1 | 0.78±0.20 | 25 |
| φ50.0 | ≥50.0 | 0.40 | 25.0-0.1 | 0.80±0.20 | 25 |
| φ60.0 | ≥60.0 | 0.43 | 30.0-0.1 | 0.80±0.20 | 25 |
Technical Data
| Property | Test Method | Standard Value |
| Tensile Strength | ASTM-D-2671 | ≥12Mpa |
| Elongation at Break | ASTM-D-2671 | ≥450% |
| Dielectric Strength | ASTM-D-2671 | 15KV/mm |
| Longitudinal Shrinkage | ASTM-D-2671 | No Drop No Flow |
| Heat Shock | ASTM-D-2671 | ≤0.5% |
| Flammability Retardant | ASTM-D-2863 | ≥27, Oxgen Index≥27 |
| Volume Resistivity | ASTM-D2-671 | 1014Ω.cm |
| Water Absorption | ASTM-D570 | 0.50% |
The shrinking temperature is low, and the shrink can be completed in a few seconds.
Environmentally friendly flame-retardant material safe, soft, flexible and flame retardant.
DIFVAN provide heat shrink cable sleeve is with yellow and green colors striped that called green yellow heat shrink.
Green yellow heat shrink tubing is made from environmental polyolefin material, processed by Two-color coextrusion and irradiation.
Polyolefin is flame-retardant and possesses good chemical, electrical and physical properties.
Green yellow heat shrink is for more suitable for application to irregular, awkward shapes.
Green yellow heat shrink working temperature is from -55℃-125℃，start shrinking temperature at 70 ℃ and shrunk completely at 120℃。
Heat shrink sleeve shrinking ratio is 2:1 and Vertical shrinkage ratio is ≤8%.
We can heat green yellow heat shrink tubing with a heat gun.
Standard color of green yellow heat shrink is yellow and green in each interval.
Green yellow heat shrink has the characteristics of soft, good flame retardancy, bright and lasting color and stable performance, which is widely used in the marking of electric wires, earthing of cables, special lines and pipeline.
Heat shrink wire wrap reliably protects wires, solder joints, terminals, connections and components from most industrial fuels, solvents and chemicals.