




Green Cable Ties — Increase Thickness Type, UL Certified, Factory Direct
DIFVAN manufactures green cable ties in an increase-thickness design — a heavier band profile that delivers higher tensile strength than standard-wall ties at the same width. From small green cable ties at 4 inches and 28 lbs for electronics and plant training, right through to 48.8-inch heavy-duty green zip ties rated at 230 lbs for large industrial cable runs — our full range covers every green cable management requirement.
We supply cable ties green to electrical distributors, garden supply companies, military hardware buyers, OEM kit assemblers, and wholesale packagers across 50+ countries. Nylon 66, UL 94 V-2 certified. Standard green and dark green available. Custom Pantone shades for OEM. Factory-direct from Wenzhou, China. Free samples before you order.

Our Green Cable Ties Range — Increase Thickness Type
One proven design. Nylon 66, UL 94 V-2. Increase-thickness band for higher tensile per width. Ten sizes from small green cable ties at 4 inches to 48.8-inch heavy-duty ties for large industrial runs. Standard green in stock. Dark green and UV-resistant grades on request.
Green Cable Ties — Increase Thickness Series, DF Range (4" to 48.8")
Our green cable ties use an increase-thickness band profile — a thicker cross-section at the same declared width compared to standard-wall ties. The result is higher tensile strength, better tooth engagement, and a more positive lock under load. DF-2.5×100 is the small green cable tie for light wiring and plant training. DF-8.8×1220 delivers 230 lbs tensile for the largest industrial cable runs and outdoor bundle management. Every size in between is in the chart below.
Material: Nylon 66, UL 94 V-2 certified by UL. Heat-resisting, erosion control, good insulation, not apt to age. Colour: Green (standard). Dark green on request. UV-resistant green for outdoor applications. Note: special-temperature nylon cable ties available on request.




Technical Specifications — Green Cable Ties & Green Zip Ties
Specification | Details |
Material | Nylon 66 (PA66) — UL 94 V-2 certified by UL |
Design Type | Increase Thickness Type — heavier band wall for higher tensile per width |
Colour — Standard | Green (mid-tone, colour-stable pigment compounded into nylon) |
Colour — Optional | Dark green | UV-resistant green (outdoor grade) | Custom Pantone for OEM |
Key Properties | Heat-resisting | Erosion control | Good insulation | Not apt to age |
Tensile Strength Range | 28 lbs / 13 kg (DF-2.5) to 230 lbs / 104 kg (DF-8.8) |
Length Range | 100mm (4.0″) to 1,220mm (48.8″) — 10 standard sizes |
Bundle Diameter Range | 2mm to 370mm across full size range |
Operating Temperature | -20°C to +85°C standard | Special-temperature grade on request |
Locking Mechanism | Self-locking single-use ratchet | Releasable version available on request |
Standard Pack | 100 pcs / bag (DF-2.5 to DF-4.8) | 50 pcs / bag (DF-8.8 series) |
Compliance | UL 94 V-2 | CE | RoHS | SGS verified |
Green Cable Ties Size Chart — Full DF Range, 4" to 48.8"
Item No. | in | mm | Width (mm) | Bundle Ø (mm) | lbs | kg | Packing |
DF-2.5×100 | 4.0″ | 100 | 2.5 | 2 – 22 | 28 | 13 | 100 pcs |
DF-3.6×200 | 8.0″ | 200 | 3.6 | 3 – 50 | 60 | 28 | 100 pcs |
DF-4.8×200 | 8.0″ | 200 | 4.8 | 3 – 50 | 80 | 36 | 100 pcs |
DF-4.8×280 | 11″ | 280 | 4.8 | 3 – 70 | 80 | 36 | 100 pcs |
DF-4.8×300 | 12″ | 300 | 4.8 | 3 – 80 | 80 | 36 | 100 pcs |
DF-4.8×360 | 14.2″ | 360 | 4.8 | 3 – 94 | 80 | 36 | 100 pcs |
DF-4.8×370 | 14.6″ | 370 | 4.8 | 3 – 98 | 80 | 36 | 100 pcs |
DF-8.8×610 | 24.4″ | 610 | 8.8 | 8 – 170 | 230 | 104 | 50 pcs |
DF-8.8×920 | 36.8″ | 920 | 8.8 | 10 – 265 | 230 | 104 | 50 pcs |
DF-8.8×1220 | 48.8″ | 1220 | 8.8 | 10 – 370 | 230 | 104 | 50 pcs |
Why Choose DIFVAN Green Cable Ties
Every distributor ranking for green cable ties is reselling standard-wall ties at a margin. Our increase-thickness design gives you more holding strength per width — and consistent green colour every batch — from the factory that makes it.

Increase Thickness Design — More Tensile, Same Width
Our cable ties green use a thicker band wall than standard-profile ties at the same declared width. DF-4.8 delivers 80 lbs / 36 kg. A standard 4.8mm tie typically rates 50 lbs. Same width, 60% more holding strength — relevant for dense cable bundles, outdoor structural runs, and garden or horticultural applications under sustained load.

Colour-Stable Green — Consistent Shade Every Batch
The green pigment is compounded into the Nylon 66 during manufacturing — not a surface coating or spray. The colour does not chip, fade from handling, or vary between batches. Your 50th order of green cable ties looks exactly like your first.

Standard Green and Dark Green — Both Available
Standard green is our stock colour: a clear, mid-tone green for electrical colour-coding and general cable management. Dark green is available on request — a deeper shade used in military, outdoor camouflage, and garden installations where standard green is too bright. Specify your shade at quotation stage.

UL Certified Nylon 66 — Not Recycled Material
Our green cable ties are Nylon 66, UL 94 V-2 certified. Heat-resisting, erosion-resistant, good insulation, not apt to age. Material certificates available. We do not use regrind or recycled nylon.

UV-Resistant Green — Outdoor and Garden Grade
Green zip ties are a natural fit for outdoor and garden environments — but standard Nylon 66 embrittles under prolonged direct sunlight. For outdoor, solar, and garden applications with UV exposure, specify our UV-resistant green grade. Same DF sizes, same tensile ratings, UV-stabilised nylon.

OEM — Custom Dark Green, Military Green, Pantone Shade
Custom polybag, retail card, and bulk carton with your logo. Custom dark green, olive green, forest green, or any Pantone-matched shade for OEM accounts. Colour swatch and packaging proof approved before production starts.
Professional Selection Guide
Two shade options, ten sizes — choose the right one for your application before you order.

Small Green Cable Ties — Start with DF-2.5×100
The small green cable tie in our range: 4.0 inches long, 2.5mm wide, 28 lbs tensile, bundles from 2mm to 22mm. Ideal for electronics, light wiring, plant training, and horticultural use where a small, discreet green tie blends into plant growth.

Standard Cable Management — DF-4.8 Series
For panel wiring, outdoor cable runs, and general bundle management: the DF-4.8 series. Eight-inch to 14.6-inch lengths, 4.8mm wide, 80 lbs tensile, bundles from 3mm to 98mm. Green identifies ground and earth cables in many colour-coding systems — these are the sizes most commonly used for that purpose.

Heavy-Duty and Long Green — DF-8.8 Series
For large industrial cable runs, outdoor structural bundle management, and military applications: DF-8.8×610 (24.4″), DF-8.8×920 (36.8″), and DF-8.8×1220 (48.8″). 8.8mm wide, 230 lbs tensile, up to 370mm bundle diameter. Dark green is frequently specified for military and camouflage-critical outdoor installations.

Standard Green or Dark Green — Choose Your Shade
Standard green is in stock across all 10 sizes — ships immediately. Dark green is available on request for military, outdoor structural, and garden installations where standard green is too bright. Custom Pantone green shades are available for OEM orders with minimum order quantities. Specify your shade at quotation stage.

UV-Resistant Grade — Garden, Outdoor and Solar
For outdoor, garden, solar, and UV-exposed applications — specify our UV-resistant green grade. Standard Nylon 66 will degrade under prolonged direct sun within 12–18 months. UV-stabilised nylon maintains both green colour and mechanical strength outdoors for 3–5 years. Contact us to confirm availability for your required size.

Plan Your Pack Size and Bulk Volume
DF-2.5 to DF-4.8: 100 pcs per bag standard. DF-8.8 series: 50 pcs per bag. Bulk carton quantities for electrical distributors, garden supply wholesalers, and OEM kit assemblers. Custom polybag or retail card with your branding and colour swatch available. Tell us your sizes, shade, and target volume — we confirm bulk pricing within 24 hours.
Get Your Free Sample
We provide green cable tie samples at no cost; you only cover the shipping. This allows you to check the green shade, locking performance, and tensile strength before placing a bulk order. Each sample shipment includes 10 pieces in your requested sizes of standard green, and if needed, a dark green sample for shade comparison. Additionally, we provide a UL 94 V-2 certification summary as well as CE and RoHS compliance documentation for your reference.
MORE THAN JUST A GREEN CABLE TIES MANUFACTURER
We manufacture green cable ties. We also make sure your shade is correct, your spec is confirmed, and your order ships on schedule.

Technical Specification Advice
Need the right size for your bundle diameter, the right shade for your application, or the UV-resistant grade for outdoor use? Tell us your application details — we confirm the correct green cable tie before you order.

Product Recommendations
Share your application — electrical colour-coding, garden and horticulture, military, outdoor installation, or retail distribution — and we match you to the right green cable tie size and shade from our range.

Installation Support
Custom polybag, retail card, and bulk carton with your logo. Custom dark green, military green, or Pantone-matched shades for OEM. Colour swatch and packaging proof approved before production starts.

Logistics Support
Sea freight (FCL/LCL) and air freight from Wenzhou, China. EXW, FOB, CIF, and DAP terms. UL 94 V-2, CE, RoHS documentation included with every order on request.
Frequently Asked Questions
Seven questions from electrical buyers, garden suppliers, military procurement teams, and OEM distributors. Contact us directly if yours is not here.
Q1: What are green cable ties used for?
Green cable ties serve three main purposes. First, electrical colour-coding: in many wiring systems, green identifies earth or ground cables — using green cable ties makes ground wire runs immediately identifiable during installation and maintenance, which speeds up fault-finding and makes panels safer to work in. Second, garden and horticultural use: green ties blend naturally into plant foliage for training climbing plants, securing stems to stakes, organising irrigation tubing, and bundling garden hoses where a neutral, plant-coloured tie is preferred. Third, military and outdoor applications: dark green cable ties are specified for military, defence, and outdoor installations where camouflage and low visibility are required.
Q2: What is the difference between green and dark green cable ties?
Standard green cable ties use a mid-tone green pigment — a clear, recognisable green suitable for electrical colour-coding and general cable management. Dark green cable ties use a deeper, richer green that blends more naturally into vegetation and outdoor environments. Dark green is the preferred specification for military and defence applications, outdoor structural cable management where low visibility matters, and garden installations at close range. Both are the same Nylon 66, UL 94 V-2 material with identical tensile performance. The only difference is pigment depth. Specify your shade at quotation stage — we can produce a colour swatch for your approval.
Q3: Are green cable ties the correct colour for earth or ground wiring?
In many international and regional wiring standards, green or green-yellow is the designated colour for protective earth and ground conductors. While cable tie colour-coding practices vary by country, contractor, and organisation, green cable ties are widely used to identify and mark earth cable runs and ground bus connections in electrical installations. Using colour-coded ties — including green for earth — makes wiring easier to trace during maintenance and fault-finding. If your colour-coding specification requires a specific green shade to match a standard or brand system, contact us and we will produce a colour swatch for your approval before production.
Q4: What sizes do small green cable ties come in?
Our smallest green cable tie is the DF-2.5×100 — 4.0 inches long, 2.5mm wide, 28 lbs tensile, covering cable bundle diameters from 2mm to 22mm. This is the small green cable tie most commonly used for electronics, light wiring, plant training, and fine horticultural bundling. Above that, DF-3.6×200 (8 inch, 3.6mm, 60 lbs) covers medium garden and wiring applications. The full DF-4.8 series covers 8 to 14.6 inch lengths for standard cable management. Our range extends to DF-8.8×1220 at 48.8 inches for large industrial and outdoor structural applications. See the complete size chart on this page.
Q5: Are green cable ties suitable for outdoor and garden use?
Standard Nylon 66 green cable ties are suitable for garden use in partially shaded conditions and short-term outdoor applications. For permanent outdoor installations, full-sun exposure, or any application with sustained direct sunlight — solar cable management, exposed outdoor cable runs, garden structures in full sun — you must specify our UV-resistant green grade. Standard Nylon 66 will embrittle and lose tensile strength under prolonged direct UV exposure within 12–18 months. Our UV-resistant green cable ties maintain both colour and mechanical strength outdoors for 3–5 years. Contact us to confirm availability for your required size and quantity.
Q6: Can I buy green cable ties in bulk for wholesale or distribution?
Yes. We supply cable ties green in bulk direct from our factory in Wenzhou, China to electrical wholesalers, garden supply distributors, military procurement accounts, and OEM kit assemblers. Standard packing is 100 pcs per bag (DF-2.5 to DF-4.8) and 50 pcs per bag (DF-8.8 heavy-duty series). Bulk carton quantities of 1,000 to 10,000 pcs per size are available. OEM accounts can order private label polybag, retail card, and bulk carton with their branding and colour specification. For mixed-colour orders — green alongside other colours in the same shipment — we accommodate this on a single order. Request a bulk price and we respond within 24 hours.
Q7: Do you offer custom dark green or Pantone-matched shades for OEM orders?
Yes. We offer custom Pantone-matched green cable ties for OEM and private label buyers who need a specific shade beyond our standard and dark green stock colours. Send us your Pantone reference, RAL code, or a physical colour swatch and we produce a colour sample for your approval before any production run starts. Military green, olive green, forest green, lime green, and Kelly green are shades we have produced previously for OEM accounts. Custom Pantone green cable ties carry a minimum order quantity per size, confirmed at quotation stage. Standard green ships from stock with no minimum colour MOQ for existing sizes.
Contact Difvan Directly
Response within 24 hours. Factory direct — no middlemen.
No.1 HongQi Road, Xinguang Industrial Zone,
Liushi, Yueqing, Wenzhou, Zhejiang, China 325603
Request Information
Ready to order green cable ties or get a bulk quote? We respond within 24 hours with a factory-direct price, shade confirmation, and free sample offer.
Tell us:
- Required size(s) — item number or length + width from the chart above
- Shade — standard green or dark green | Custom Pantone if OEM
- Indoor standard or outdoor UV-resistant green grade
- Target quantity and pack format (100pcs bag / bulk carton / OEM packaging)
- OEM or private label requirements if applicable
Ready to order green cable ties or get a bulk quote? Contact DIFVAN for factory-direct pricing, shade confirmation, free samples, and 24-hour support—also explore our Brown Cable Ties, Gold Cable Ties, Pink Cable Ties, White Cable Ties full Cable Tie Range, and Bulk Zip Ties Wholesale options.
