Adhesive Heat Shrink

Adhesive lined heat shrink is one of heat sheink tube. The outer layer is made of soft, high-quality polyolefin and the inner layer is hot-melt adhesive.

Adhesive heat shrink protects against moisture and corrosive environments, while providing electrical insulation and mechanical protection.

 

  • adhesive lined heat shrink tubing
  • adhesive heat shrink
  • adhesive lined heat shrink

heat shrink tubing princess auto

Adhesive Heat Shrink

Waterproof shrink tube

Excellent electrical insulation

Characteristics

Shrink Ratio: 3:1

Minimum Shrinkage Temp: 70℃

Full Shrinkage Temp: 110℃

Operating Temp: -55℃ to 125℃

Tensile Strength:10.4MP

Dielectric strength: 15KV/mm

Flammability: Flame

Supplied format (round or flat): Product is supplied flat

Cutting method: Scissors or sharp knife
Retardant Approvals: UL Approved

 

Item NO.Before shrink/mmAfter shrink/mm
Inner DiametreInner DiametreWall thicknessAdhesive thickness
φ2.4≥2.41.00.50±0.060.30±0.06
φ3.2≥3.20.80.96±0.060.95±0.08
φ4.8≥4.81.61.10±0.080.40±0.08
φ6.4≥6.42.21.20±0.080.45±0.08
φ7.9≥7.92.61.35±0.080.50±0.08
φ9.5≥9.53.21.45±0.080.50±0.08
φ12.7≥12.74.21.70±0.080.60±0.08
φ15.0≥15.05.21.80±0.100.55±0.10
φ19.1≥19.16.32.00±0.100.55±0.10
φ25.4≥25.48.52.10±0.100.55±0.10
φ30.0≥30.010.22.20±0.100.60±0.10
φ35.0≥35.011.52.30±0.100.60±0.10
φ40.0≥40.013.52.40±0.100.60±0.10
φ50.0≥50.017.02.70±0.100.70±0.10
φ60.0≥60.021.03.00±0.150.80±0.10
φ70.0≥70.023.03.20±0.200.90±0.10
How to install adhesive heat shrink?

1, As it is 3:1 heat shrink ratio, please choose the right size tubes.

2, Insert the wires to the heat shrink tubing.

3, Use the heat gun or lighter to shrink tube.

4, Don’t touch the tube until it is cool competely.

Adhesive heat shrink’s details

 

Adhesive heat shrink application

 

If you are looking to protect your wires, cables, ropes or connector components from water, dust, chemicals, abrasion and debris, adhesive heat shrink is your best choice.

Adhesive lined heat shrink tubing is a flexible, abrasion-resistant option for cable management.

Adhesive heat shrink manufactured by co-extursion of polyolefin and hot-melt adhesive.

Adhesive lined heat shrink designed to provide both insulation and sealing protect articles.

Adhesive shrink tube also creates an insulating seal once heated, providing another layer of environmental protection and heat resistance for cables and wires.

When heat adhesive heat shrink tubing, 3:1 Heat shrink tubing reduces to one third of its original size, conforming to the shape of the underlying material for a firm yet versatile covering.

The start shrinkage temperature of adhesive heat shrink is 70℃, and the full shrinkage temperature is 110℃.

Various sizes available to accommodate large diameter wires or create a tight seal around awkwardly-shaped items.

Many different colors of adhesive lined can be choose .

Adhesive shrink wrap are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY.  Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.

Dual wall heat shrink have unique sealant formulation provides a waterproof seal and no drip during installation.

Adhesive heat shrink can shrink quickly, and there is no risk of cable damage or messy glue leakage.

When the tubing shrinks and cools down, the inner layer forms an adhesion layer between the tubing and the component or wire.

 

Scroll to Top